From then on, pressing a button will automatically start the application assigned to it.īe sure to install the scanner software in a Mac OS X environment, and not in Classic mode. Other users must start EPSON Scanner Monitor in the Applications folder before using the buttons for the first time. Initially, only the user who installed the scanner software can scan using the buttons. When in Classic mode, the buttons are disabled. Also, make sure the desired button is selected in the Scanner events list box, and the desired application in the Send to this application list is selected. Also, make sure the desired button is selected in the Select an event list box, and Start this program is selected.Ĭlick the Events tab in your scanner's Properties dialog box and make sure the Disable device events check box is clear. Make sure EPSON Smart Panel is installed.Ĭlick the Events tab in your scanner's Properties dialog box and make sure Take no action is not selected. In this case, connect the scanner directly to the computer's USB port, or through one hub. The scanner may not work properly when connected to the computer through more than one hub.
Use the USB cable that came with your scanner. Your system may not work properly if you use a USB cable other than the one supplied by EPSON. Wait until the Start button light stays green (ready for scanning). If you cannot solve a problem, contact your dealer or a qualified customer support person for assistance. Make sure the AC adapter is connected to the scanner and the power cord is plugged into an electrical outlet. Also, see the documentation that came with your computer and software for possible solutions. See your Start Here poster to confirm that you have set up the scanner in the correct way. Incorrect setup of your computer or software Operation problems usually occur because of: Problems you may have while using the scanner often involve the operation of your software and computer. Paper jams in the Automatic Document Feeder You cannot scan from the Automatic Document Feeder Pressing the buttons in a Mac OS X environment starts Classic mode Pressing the button does not start scanning
0 kommentar(er)
